Garage Door Repair: Troubleshooting

A garage door is a very good investment for your home. Not only would it look well in your home, but it can also add much-needed security. However, for different reasons, it might stop working all of a sudden. A lot of things can possibly go wrong in your it. That is why it is important to learn a thing or two about troubleshooting. This article on garage door repair will take a closer look on the different techniques for troubleshooting an automatic garage door. Read more about Arvada garage door repair

  1. Check if the door can operate on its own- Use the master switch of the garage to check if it will function. If it works while using the master switch, that means the remote, sensor, or antenna is most likely the problem. If it still doesn’t function, it might be on the electrical system or running gear.
  2. Check if the cord is plugged in- This is one of those things that can make any garage repair specialist go crazy. Finding out that the cord is unplugged would most likely make you feel crazy, but at least it will save you a ton of trouble in the long run.
  3. Check the motor- The motor of your door can be prone to different things. If you are not sure what’s wrong, check if it has gone hot. If it does, let it cool for the meantime (minimum 15 minutes). After that, you can test your door once again.
  4. Check the sensors- One overlooked aspect of garage repair is the remote sensor. If it is damaged, misaligned, or obstructed, it can render your remote useless. Check if the sensor is properly aligned and remove any potential obstruction such as dust or cobwebs.
  5. Check your remote- It’s possible that it’s your remote control that has the problem and not your door. Check if your remote control still has battery left. Also check if all buttons are working properly.
  6. Check the running gear- It is possible that your door is not functioning well because the running gear is not working properly. It is possible that gears and/or sprockets are worn out or lacking lubrication. That’s where you’ll need to put your attention to if that’s the case.
  7. Check if the door can operate on its own- Use the master switch of the garage to check if it will function. If it works while using the master switch, that means the remote, sensor, or antenna is most likely the problem. If it still doesn’t function, it might be on the electrical system or running gear.
  8. Check the wiring- If everything is plugged in correctly and all the running gear looks solid, it might mean that the electrical system is the problem. It is possible that the wires are damaged or the circuit is grounded.

Before going for a garage door repair, it is important to run some troubleshooting tests to see what exactly is wrong. While you can do some things easily by yourself, it might be recommended that you get the help of a professional for some of the more advanced tasks (i.e.: repairing running gear and electronics).

Leave a comment

Your email address will not be published. Required fields are marked *